Device Configuration Menu Screen - Cabletron Systems 2208 User Manual

Chapter 5: Local Management
5.6

DEVICE CONFIGURATION MENU SCREEN

The SWITCH CONFIGURATION and
NOTE
SMARTTRUNK CONFIGURATION menu items on the Device
Configuration Menu screen will not display if the operational
mode of the device has been set to SECURE FAST VLAN:
Section 5.7.9
mode.
The Device Configuration Menu screen,
Local Management screens. These screens allow you to configure and
monitor operating parameters, modify SNMP community names, set
SNMP traps, configure switch parameters and configure 2H22-08R ports.
To access the Device Configuration Menu screen from the Device Menu
screen, use the arrow keys to highlight the DEVICE
CONFIGURATION menu item and press ENTER. The Device
Configuration Menu screen displays.
Device Type: 2H22-08R
Figure 5-8 Device Configuration Menu Screen
Page 5-14
provides instructions for setting the operational
2H22-08R LOCAL MANAGEMENT
Device Configuration Menu
GENERAL CONFIGURATION
SNMP COMMUNITY NAMES
SNMP TRAPS
SWITCH CONFIGURATION
ETHERNET INTERFACE CONFIGURATION
SMARTTRUNK CONFIGURATION
DEVICE SPECIFIC CONFIGURATION
EXIT
2H22-08R SmartSwitch 2208 User's Guide
Figure 5-8, provides access to
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
XX.XX.XX
RETURN
2251_66