Cabletron Systems 2208 User Manual page 73

THE COM PORT HAS BEEN RECONFIGURED AND THERE IS NO IP
ADDRESS SET FOR THIS DEVICE. YOU WILL NO LONGER BE ABLE
TO MANAGE THIS BOARD. DO YOU STILL WISH TO RECONFIGURE
THIS COM PORT?
3. Use the arrow keys to highlight YES. Press ENTER.
4. If you ENABLED the port, proceed to step 5. If you DISABLED the
port, use the arrow keys to highlight SAVE at the bottom of the screen,
then press ENTER.
5. When the message "SAVED OK" displays, the edits you made are
saved.
Exiting without saving causes the message "NOT SAVED --
!
PRESS SAVE TO KEEP CHANGES" to display. Exiting without
saving causes all edits to be lost.
CAUTION
6. Use the arrows keys to highlight the Application field.
7. Use the SPACE bar or BACKSPACE to step through the available
settings until the operation you require displays.
available settings and their corresponding applications.
2H22-08R SmartSwitch 2208 User's Guide
YES
Figure 5-13 COM Port Warning Screen
General Configuration Screen
WARNING
NO
Table 5-3 lists the
Page 5-29
174252