Snmp Community Names Screen - Cabletron Systems 2208 User Manual

Chapter 5: Local Management
5.8

SNMP COMMUNITY NAMES SCREEN

The SNMP Community Names screen allows you to set SNMP
management community names. Community names act as passwords to
Local/Remote Management and are agents of security access to the
2H22-08R.
Access to the 2H22-08R is controlled by enacting any of three different
levels of security authorization (read-only, read-write, and super-user).
Super-user access gives you full management privileges,
NOTE
allows existing passwords to be changed, and all modifiable
MIB objects for the Cabletron Container MIB and Internet
MIB-II to be edited.
To access the SNMP Community Names screen from the Device
Configuration Menu screen, use the arrow keys to highlight the SNMP
COMMUNITY NAMES menu item and press ENTER. The SNMP
Community Names screen, shown in
Event Message Line
Device Type: 2H22-08R
SAVE
Figure 5-15 SNMP Community Names Screen
Page 5-32
Figure
2H22-08R LOCAL MANAGEMENT
SNMP Community Names
Community Name
public
public
public
EXIT
2H22-08R SmartSwitch 2208 User's Guide
5-15, displays.
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Access Policy
read-only
read-write
super-user
XX.XX.XX
RETURN
2159-17