Setting The Tftp Gateway Ip Address - Cabletron Systems 2208 User Manual

5.7.4

Setting the TFTP Gateway IP Address

If the network TFTP server is located on a different IP subnet than the
2H22-08R, a Gateway IP address must be specified. To set the TFTP
Gateway IP address, perform the following steps:
1. Use the arrow keys to highlight the TFTP Gateway IP Address field.
2. Enter the IP address of the TFTP gateway using the DDN format.
For example: 134.141.80.122
3. Press ENTER. If the TFTP gateway IP address entered is in a valid
format, the cursor returns to the beginning of the TFTP Gateway IP
Address field. If the entry is not valid, the screen displays "INVALID
TFTP GATEWAY IP ADDRESS OR FORMAT ENTERED". In this
instance, Local Management refreshes the TFTP Gateway IP Address
field with the previous value.
4. Use the arrow keys to highlight the SAVE command.
5. Press ENTER. The Event Message Line at the top of the screen
displays "SAVED OK".
2H22-08R SmartSwitch 2208 User's Guide
General Configuration Screen
Page 5-23