Table of Contents
Advertisement
Chapter 3: Installation
3.2
UNPACKING THE 2H22-08R
To unpack the 2H22-08R and verify the contents of the shipment, proceed
as follows:
1.
Open the carton and remove the packing material protecting the
2H22-08R.
2.
Verify the contents of the carton as listed in
Item
2H22-08R
Antistatic Wrist Strap
Console Cable Kit
Rackmount Kit
Strain-Relief Bracket
Power Cord
3.
Remove the black and yellow tape seal on the non-conductive bag to
remove the 2H22-08R.
4.
Perform a visual inspection of the device for any signs of physical
damage. If there are any items missing or damaged, contact Cabletron
Systems Global Call Center as described in
3.3
INSTALLING OPTIONS
Install any optional equipment before proceeding to
NOTE
Section
If the 2H22-08R is to be installed with an optional Fast Ethernet Interface
Module, refer to
Page 3-2
Table 3-1 Contents of 2H22-08R Carton
3.4.
Appendix C
for installation instructions.
2H22-08R SmartSwitch 2208 User's Guide
Table
3-1.
Quantity
1
1
1
1
1
2
Section
1.7.
Advertisement
Table of Contents
Troubleshooting
