Local Management; Broadcast Suppression - Cabletron Systems 2208 User Manual

Cabletron systems user guide 2h22-08r smartswitch 2208
Hide thumbs Also See for 2208:
Table of Contents

Advertisement

Chapter 1: Introduction
1.4

LOCAL MANAGEMENT

Management of the 2H22-08R is accomplished using Local Management
tools or remote Simple Network Management Protocol (SNMP)
management stations. Out-of-band Local Management is accessible
through the RS232 COM port on the front panel using a VT100 terminal,
or a remote VT100 terminal emulator via a modem connection, and
in-band via a Telnet connection. In-band remote management is possible
through any SNMP compliant Network Management Software.
Local Management provides the tools to manage the 2H22-08R, and its
two Fast Ethernet Interface Modules. It also allows the following tasks to
be performed:
Assign an IP address and subnet mask to the 2H22-08R.
Select a default gateway and default interface.
Control local and remote access.
Designate workstations to receive SNMP traps from the 2H22-08R.
Chapter 5
provides detailed information about Local Management of the
2H22-08R, and its two optional Fast Ethernet Interface Modules. Local
Management also provides the features detailed in
Section
1.4.4.
1.4.1

Broadcast Suppression

Broadcast Suppression allows a user to set a desired limit of receive
broadcast frames per port/per second to be forwarded out of the other
ports on the module up to the set limit. Any broadcast frames above this
specified limit are dropped. In the event that broadcast frames are being
suppressed, multicast and unicast frames continue to be switched without
suppression.
Page 1-6
2H22-08R SmartSwitch 2208 User's Guide
Section 1.4.1
through

Advertisement

Table of Contents
loading

This manual is also suitable for:

2h22-08rSmartswitch 2208 2h22-08r

Table of Contents

Save Article as PDF