Table of Contents
Advertisement
T3SP-Series Operator's Manual
17. Certifications
Teledyne LeCroy certifies compliance to the following standards as of the time of publica-
tion. Please see the EC Declaration of Conformity document shipped with your product for
current certifications.
17.1 EMC Compliance
17.1.1 EC DECLARATION OF CONFORMITY - EMC
The instrument meets intent of EC Directive 2014/30/EU for Electromagnetic Compatibility.
Compliance was demonstrated to the following specifications listed in the Official Journal
of the European Communities:
EN 61326-1:2013, EN 61326-2-1:2013 EMC requirements for electrical equipment for mea-
1
surement, control, and laboratory use
Electromagnetic Emissions:
2,3
EN 55011:2016+A1:2017, Radiated and Conducted Emissions Group 1, Class A
EN 61000-3-2:2014 Harmonic Current Emissions, Class A
EN 61000-3-3:2013 Voltage Fluctuations and Flickers, Pst = 1
Electromagnetic Immunity:
EN 61000-4-2:2009 Electrostatic Discharge, 4 kV contact, 8 kV air, 4 kV vertical/horizontal
4
coupling planes
EN 61000-4-3:2006+ A2:2010 RF Radiated Electromagnetic Field, 3 V/m, 80 - 1000 MHz;
3 V/m, 1.4 - 2 GHz; 1 V/m, 2 - 2.7 GHz
EN 61000-4-4:2012 Electrical Fast Transient/Burst, 1 kV on power supply lines, 0.5 kV on I/O
4
signal data and control lines
4
EN 61000-4-5:2014+A1:2017 Power Line Surge, 1 kV AC Mains, L-N, L-PE, N-PE
EN 61000-4-6:2014 RF Conducted Electromagnetic Field, 3 V
, 0.15 - 80 MHz
rms
EN 61000-4-11:2004+A1:2017 Mains Dips and Interruptions, 0%/1 cycle, 70%/25 cycles,
4,5
0%/250 cycles
98
931776 RevE
Advertisement
Table of Contents
