Time savers for making calls
Storing a number on a memory button for
Autodial
You can program memory buttons for one-touch dialing of
internal or external telephone numbers.
Buttons used for lines, answer DNs, or handsfree cannot be
used as autodial buttons.
If the power to your Norstar system is off for more than three
days, autodial numbers, and some other system programming,
may be lost from the memory.
Adding an autodial button
Use these features to program external and internal numbers.
1. Press
Press
2. Choose a button and then enter the number as if you were
dialing it.
When programming autodial you can use:
•
Last Number Redial
•
Saved Number Redial
•
destination codes — use the intercom line
•
host system signaling
N0130946 01
to program an external number.
to program an internal number.
Modular ICS 7.1 System Coordinator Guide