Making Calls From An Isdn Terminal; Dialing Calls With A Second Dial Tone (Profile 2, Only); Changing How You Dial Your Calls - Nortel Compact ICS 7.1 Coordinator Manual

If you program a button with an indicator to access a line pool, when all the
lines in a line pool are busy, the indicator for the line pool button turns on.
The indicator turns off when a line becomes available.

Making calls from an ISDN terminal

ISDN terminals do not have line buttons or intercom buttons as do Norstar
and BST telephones. To make an outgoing call from an ISDN terminal,
access an external line by entering a line pool code or by using the ARS
feature.
Dialing calls with a second dial tone (Profile 2,
only)
Some call destinations require a two-stage dialing sequence
that requires a second dialing tone before the local numbers are
dialed. Your system administrator will indicate which
destination codes or numbers require this process.
1. Dial the destination code and any initial digits specified for
the call.
2. When you hear the dial tone again, complete the dialing
sequence.

Changing how you dial your calls

≤•°¤
1. Press
£
2. Press
≥
3. Press
The dialing modes feature code cannot be programmed onto a memory
button.
N0130955 01
.
or NEXT until the dialing mode you want appears.
or OK to select the displayed dialing mode.
Making calls / 75
Compact ICS 7.1 System Coordinator Guide