Adding/Removing Telephones From Ccr Groups - Nortel Compact ICS 7.1 Coordinator Manual

88 / Auto Attendant
If CCR is programmed to answer the call in less than two rings, the call
information may not be captured and forwarded to telephones in the CCR
group.
Adding/removing telephones from CCR
groups
The greeting you create for CCR tells a caller to press a number to reach a
group of telephones. You add or remove telephones from these groups
(CCR groups) in programming.
1. Place the programming template over the appropriate buttons of the
programming telephone.
Press ≤••¤flfl‹››.
2.
Press ¤‹fl›fl (the default System Coordinator password).
3.
Press " twice.
4.
Press ≠, ', and ≠.
5.
Press ' three times. The display shows CCRˆ.
6.
Press ≠.
7.
Press '. The display shows CCR groupsˆ.
8.
Press ≠ and enter the number of the group to which you want
9.
to make changes.
10. Press ≠ and enter the internal number of the telephone you
want to add or remove from the group.
11. Press CHANGE to select the status of the telephone in the group:
Assigned, Unassgnd.
You can have a total of nine CCR groups. Each group can include up to 20
telephones.
Compact ICS 7.1 System Coordinator Guide N0130955 01