Paper Entrance Side Green Drive Belt Replacement - GBC AdvancedPunch Technical & Service Manual

4.6.3.1 Paper Entrance Side Green Drive Belt Replacement

Advanced Punch Service Manual
[1]
ENTRANCE SIDE
Figure 4.20 Opening Door and Removing Chip Tray.
1. Disconnect the entrance sensor wire from the side frame [1].
2. Remove the 4 screws that secure the front paper chute [2].
[2]
Figure 4.21 Remove 4 Paper Chute Screws.
3. To remove the GP2 aligner latch [9], do the following:
© Copyright 2009 GBC. All rights reserved.
Repair and Adjustment Procedures
EXIT SIDE
[2]
4-21