Punch Drive Cam Lubrication - GBC AdvancedPunch Technical & Service Manual

Section 1

1.4.18 Punch Drive Cam Lubrication

1-30
Maintenance Schedule
Lubricate, with a PTFE based grease, per schedule (see Table 1.2, "Customer
Maintenance," on page 10).
Procedure
The Back Gauge assembly must be removed in order to lubricate the punch cams.
To remove the punch, see "Punch Module Removal" on page 4-49. To lubricate
the cams, see "Punch Drive Cam Lubrication" on page 4-54.
© Copyright 2009 GBC. All rights reserved.
Advanced Punch Service Manual