Aligner Panels; Aligner Idler Roller Replacement - GBC AdvancedPunch Technical & Service Manual

4.6 Aligner Panels

4.6.1 Aligner Idler Roller Replacement

Advanced Punch Service Manual
The entrance side Aligner panel positions the paper in the Back Gauge for
punching. The exit side Aligner panel positions the paper for the finisher. Prior to
servicing the Aligner Panels, separate the Advanced Punch from the printer. Refer
to "Separating the Punch From the Printer"
Maintenance Schedule
Clean every 750K cycles. Refer to
21.
Tools Required
•
Flat head screw driver
•
Needle nose plyers
Procedure
© Copyright 2009 GBC. All rights reserved.
Repair and Adjustment Procedures
on page 4-1.
"Idler Roller Inspection and Cleaning"
Figure 4.18
on page 1-
[1]
4-17