Die Sets Xe / A4 - GBC AdvancedPunch Technical & Service Manual

3.4

Die Sets XE / A4

4. PUNCHING PATTERNS
The AdvancedPunch uses a variety of easily interchangeable die
sets that allow you to punch documents in line for several different
binding styles. By selecting the appropriate die set, you can use your
AdvancedPunch to punch documents in any of the binding styles
indicated in Table 1.
For Plastic Comb Binding:
1
PB Plastic Bind; Hole Size: 8mm x 3.2mm (0.315" x 0.126") (LxW); Centre-to-Centre Hole Spacing: 14.3mm (0.563")
1
PB Plastic Bind; Australia Hole Size: 8mm x 3.2mm (0.315" x 0.126")(LxW) Centre to Centre hole spacing: 14.3mm (0.563")
For Twin Loop™ Binding:
W3 Wire; Round; 3 Holes per inch; Hole Size: 4mm (0.158") Diameter; Centre-to-Centre Hole Spacing: 8.5mm (0.335")
W2 Wire; Round; 2 Holes per inch; Hole Size: 6.5mm (0.256") Diameter; Centre-to-Centre Hole Spacing: 12.7mm (0.5")
1
W3 Wire; Square; Australia; 3 Holes per inch; Hole Size: 4mm x 4mm (0.158" x 0.158") (L x W) Centre to Centre Hole Spacing:
8.5mm (0.335)"
1
W2 Wire; Square; Australia; 2 Holes per inch; Hole Size: 6.4mm x 5.5mm (0.252" x 0.217") (L x W) Centre to Centre hole
spacing 12.7mm (0.5)
For Loose-leaf Binding:
1
4 Ring Binder; European (Standard Loose-leaf Patterns); Hole Size: 8mm (0.315") Diameter
1
2 Ring Binder; European (loose-leaf pattern), Hole Size: 8mm (0.315") Diameter
For Velo ® Binding:
VB Velo ® Bind Round; 1 Hole per inch Hole Size: 3.2mm ( 0.126") Diameter; Centre-to-Centre Hole Spacing: 25.4mm (1")
For Colour Coil™ Binding:
C4 Coil; Round; 4 Holes per inch; Hole Size: 4.5mm ( 0.177") Diameter; Centre-to-Centre Hole Spacing: 6.3mm (0.248")
®
ProClick A4 34-Hole Binding:
1
®
PC ProClick ; Rectangular; 3 holes per inch, Hole size: 5.5mm (0.217"H) x 5.0mm (0.197"W). Centre to Centre 8.5mm (0.335")
Graphics do not represent actual punch pattern dimensions or spacing.
Please note that each punching style listed above requires a
separate die set for the AdvancedPunch. The AdvancedPunch can
hold up to four Die Sets in it's cabinet (one in the operating slot and
three in the storage area).
To purchase additional or replacement Die Sets, contact your
authorized sales representative.
You cannot use die sets for the AdvancedPunch..
You can confirm the attached die set in the printer/copier.
Advanced Punch Service Manual
21
20
34
23
4
2
34
© Copyright 2009 GBC. All rights reserved.
AdvancedPunch
Xerox Part Number:
XEROX PB-21H, A4 498K19440
XEROX PB-20H, A4 498K19340
XEROX W3-34H-RND, A4 498K19370
XEROX W2-23H-RND, A4 498K19360
XEROX W3-34H-SQ, A4 498K19390
XEROX W2-23H-SQ, A4 498K19380
XEROX 4H-8mm, A4 498K19430
XEROX 2H-8mm, A4 498K19420
XEROX VB-12H, A4 498K19400
XEROX C4-47H, A4 498K19350
XEROX PC-34H, A4 498K19410
Preface
GB
P-5