GBC AdvancedPunch Technical & Service Manual page 109

Repair and Adjustment Procedures
5. Remove the belts in the following order.
a. Remove the bottom left and right vertical belts [1] by walking the belts over
the pulleys.
b. Loosen the belt idler rollers [2] and remove the upper vertical belt.
c. Remove the bottom triangular belt [4].
[3]
[1]
[1]
[2]
[4]
Figure 4.54 Order of Belt Removal.
Advanced Punch Service Manual 4-51
© Copyright 2009 GBC. All rights reserved.