GBC AdvancedPunch Technical & Service Manual page 16

Section 1
1-4
9. Open the bottom U-channel by pressing the lever in [1] and lower the
U-channel [2] and clear the path.
[2]
Figure 1.4 Opening the Bottom U-Channel
10. When all the paper is cleared, close the U-channel, Aligner Panels, and
Bypass.
11. Shut the cabinet door.
12. Verify on the printer screen that the paper jam has been cleared. If not, repeat
the above steps.
13. Press the resume button on the printer. The printing operation should resume.
© Copyright 2009 GBC. All rights reserved.
Advanced Punch Service Manual
[1]