Drive Roller Inspection And Cleaning - GBC AdvancedPunch Technical & Service Manual

Section 1

1.4.13 Drive Roller Inspection and Cleaning

1-24
Drive rollers are located opposite the idler rollers.
Maintenance Schedule
Inspect and clean every 750K cycles.
Procedure
Inspect for wear patterns or groves. The roller surface should be even and not
glazed.
Some drive rollers are not easily accessible. Those that are [1], should be
inspected and cleaned when the idler rollers are removed. Where practical, make
sure the rollers are clean. Clean with a soft cloth and alcohol. See also "Idler
Roller Inspection and Cleaning" on page 1-20.
[1]
[1]
© Copyright 2009 GBC. All rights reserved.
[1]
[1]
Advanced Punch Service Manual
[1]
[1]