Table of Contents
Advertisement
3. Setting the Right Expectations
3.1
Product Positioning
3.2
Long Edge Feed (LEF) Only
Advanced Punch Service Manual
The following excerpts are copied from sales and marketing literature. This
customer expectation information is helpful for the service technician.
The Advanced Punch provides a flexible, cost effective punching solution for light
to medium level production oriented customers.
•
Designed for customers that have the need to punch their documents at a
maximum of 60-70% of their overall workflow.
•
Recommended punching limit to 200K sheets per month. (600k sheets in
bypass mode)
•
Die Sets will decrease in performance over time based on the types of stocks
and weights that are being punched.
•
The expected life of a dieset is 500K punches. However, if paper stock
punched is typically 20 lb. bond, then up to 2 million punches can be
achieved.
•
Should be regarded as a long-term supply item.
The Advanced Punch is designed to punch LEF only. No exceptions. Attempting
to punch a sheet size other than LEF will cause a paper jam.
•
Use a colored sheet insert (instead of the tab) in the job workflow for easier
tab insertion after the job has been run.
© Copyright 2009 GBC. All rights reserved.
Preface
P-3
Advertisement
Chapters
Table of Contents
