Back Gauge Paddle - GBC AdvancedPunch Technical & Service Manual

4.8.3 Back Gauge Paddle

Advanced Punch Service Manual
Procedure
Deep or angled deep punches may be caused by a broken weld on the Paddle [1]
shaft. Inspect the Paddle and press down on it while holding the linkage to keep
the linkage from moving. If the paddle moves [2], replace the Back Gauge
assembly.
Figure 4.50 Testing for Broken Paddle Weld.
© Copyright 2009 GBC. All rights reserved.
Repair and Adjustment Procedures
[1]
[2]
4-47