Selecting Datapages; Customizing The Data Application - Raymarine a series Installation And Operation Instructions Manual

18.3

Selecting datapages

To select datapages using a non-touch multifunction display
follow the steps below.
From the data application:
1. Move the Joystick Down to goto the next page, or
2. Move the Joystick Up to goto the previous page.
222

18.4 Customizing the data application

You can customize the data application to show the system and
instrument data that you require.
In addition to displaying the default, pre-configured datapages in
the data application, you can also:
• Change the order datapages appear.
• Customize datapages content to your specific requirements.
• Rename the datapages.
• Add new custom datapages.
• Delete existing datapages.
• Set boat details such as number of engines, fuel tanks, and
batteries.
• Set the maximum engine RPM range.
• Change color theme.
• Change the units of measurement.
• Reset minimum and maximum readings.
• Reset all pages to default.
Changing datapage order
You can change the order that datapages appear.
From the data application:
1. Scroll to the datapage you want to move.
2. Select Menu.
3. Select Edit Page.
The edit page menu is displayed.
4. Select Move Page Up or Move Page Down.
Each time move page up or move page down is selected
the datapage will be moved 1 space up or down in the data
application.
Customizing datapage content using
touch
On touchscreen multifunction displays you can customize a data
item by pressing and holding on the item onscreen.
From the Data application:
1. Display the datapage that contains the data item you want
to change.
2. Touch and hold your finger on the data item.
After approximately 3 seconds the data item is highlighted
and the Select Data Category menu is displayed.
3. Navigate the menu to locate the data item you want to use.
4. Select the data item.
The selected data item is now displayed in place of the
original data item.
Customizing datapage content
From the data application:
1. Select Menu.
2. Select Edit Page.
3. Select the cell you want to change.
4. Select Select Data Category.
5. Select a data category.
Selecting a data category will display a list of data items for
that category.
6. Select the data item you want to display.
Once selected a tick will be placed next to the data item in the
menu and the cell on screen will display the new data item
7. Repeat steps 3 to 6 for all the data items you want to change.
Renaming a datapage
From the data application:
1. Select Menu.
2. Select Edit Page.
3. Select Rename Page.
The on screen keyboard is displayed.
New a Series / New c Series / New e Series