Keypad Network Connection; Weather Receiver Connection - Raymarine E SERIES Installation Instructions Manual

4.17 Keypad network connection

Raymarine ® remote keypads (e.g. the RMK-9)
can be connected directly to the display's network
connection or can be connected to the SeaTalk
network, via a Raymarine
Multiple keypads can be connected to a system, with
each keypad capable of controlling up to 4 MFDs.
2
1. MFD
2. Network connection to MFD or Raymarine
network switch (RayNet cable)
3. RMK-9 Keypad
4. Alternate power connection (Right angled power
cable)
Note:
a. When connecting the keypad directly to
the MFD, unless the MFD is capable of
providing power over ethernet the keypad
must be powered separately, using the
alternate power connection.
b. When connecting the keypad via a network
switch the keypad must be powered
separately, using the alternate power
connection.
For further information regarding keypad installation
(including power connection and mounting), refer to
the installation instructions supplied with the keypad.
Once connected the keypad must be paired with the
each MFD you want it to control.
Cables and connections
® network switch.
1
3

4.18 Weather receiver connection

A Sirius XM weather receiver can be connected
directly to the display's network connection or can
hs be connected to the SeaTalk
Raymarine ® network switch.
1. Raymarine weather receiver
2. MFD
For information on connecting an SR50 using
D12694-3
SeaTalk ng please refer to 82257 – SR50 operation
which can be downloaded from the Raymarine
website: www.raymarine.com.
®
For further information regarding weather receiver
installation (including power connection and
mounting), refer to the installation instructions
supplied with the weather receiver.
Note: You must select your Raymarine
Weather receiver in the Weather Set-up menu:
(Homescreen > Set-up > System Settings >
External Devices > Weather Set-up.
hs network, via a
2
1
AUDIO ANTENNA NETWORK POWER
hs
SeaT alk / RayNet
D12902-3
51