1Kw Sonar Specification; Internal Gnss (Gps / Glonass) Receiver Specification; Nmea 0183 Sentences - Raymarine AXIOM PRO Installation Instructions Manual

1kW sonar specification

The following specification only applies to Axiom™ Pro RVX products.
Channels
Range

8.3 Internal GNSS (GPS / GLONASS) receiver specification

Channels:
Cold start:
Receiver IC Sensitivity:
GNSS compatibility:
SBAS compatibility:
Operating frequency:
Signal Acquisition:
Almanac Update:
Geodetic Datum:
Refresh Rate:
Antenna:
Position Accuracy:
Note:
* Supported in future software update.

8.4 NMEA 0183 sentences

For a list of supported NMEA 0183 sentences, please refer to the LightHouse 3 Advanced Operations
manual.
To obtain the latest version of the manual, visit:
70
Channels
• 1 x 50 kHz Low CHIRP
• 1 x 200 kHz High CHIRP
0.9 m (3 ft) to 914.4 m (3,000 ft) (In optimum conditions using a 1kW
transducer.)
Multiple — ability to simultaneously track up to
28 satellites
<2 minutes
• 165 dBm (Tracking)
• 160 dBm (Acquisition)
• 148 dBm (Cold start)
• GPS
• GLONASS
• Beidou*
• Galileo*
• EGNOS
• GAGAN
• MSAS
• QZSS
• WAAS
1574 MHz to 1605 MHz
Automatic
Automatic
WGS-84 (alternatives can be selected on the
MFD)
10 Hz (10 times per second)
• Internal — Ceramic chip mounted near top of
• Without SBAS: <= 15 metres 95% of the time
• With SBAS: <= 5 metres 95% of the time
www.raymarine.com/manuals
unit