Tracks; Creating A Track - Raymarine LIGHTHOUSE 4 Operation Instructions Manual

Route options
Route options can be accessed from the route plan list.
The following options are available:
• [Rename route] — rename the route.
• [Color] — change the color of the route.
• [Time] — switch between ETA (Estimated Time of Arrival) and TTG (Time
To Go).
• [Speed] — switch between [Actual] (SOG) and [Planned]. When the speed
is set to planned you can select a desired speed for navigating the route.
• [Hide/show on chart] — hide or show the selected route. When hidden
the route will not be displayed in the Chart app but will still be accessible
from the Route list.
• [Export] — export the route to a memory card.
• [Delete route] — delete the route.
Waypoints, Routes and Tracks

9.3 Tracks

Tracks are used to record where you have been. Tracks are made up of track
points that are created at regular time or distance intervals. You can store up
to 15 tracks on your display, each track can contain up to 10,000 points.
When a track reaches 10,000 points it will be saved and if there is an unused
track available a new track will be started automatically. If all tracks are used,
then when the 15th track reaches 10,000 points track recording will stop
and a notification will be displayed.
Tracks can be converted into routes so that they can be followed.

Creating a track

You can record your vessel's journey using Tracks.
1. Select and hold on your vessel icon to display the vessel pop-over options.
2. Select [Start track].
Your vessel's journey will now be recorded.
3. Select [Stop track] from the pop-over options when you have completed
your track.
4. Select [Save] to save the track or [Delete] to remove the track.
You can also start a new track recording at anytime from the Chart menu:
[Menu > New > Start a new track]. When using the Chart menu to start a
track, if a track is already recording then it will be saved before the new track
139