Specifications For Model Fc-782 Mfcs; Table 6-9. Specifications For Fc-782 Series Mfcs - Advanced Energy FC-77 Series User Manual

®
Advanced Energy

Specifications for Model FC-782 MFCs

The following table lists specifications for the FC-782 MFCs.

Table 6-9. Specifications for FC-782 series MFCs

Specification
Full-scale range (N equivalent)
2
Valve type
Response time
Note 1
Accuracy
Linearity
Repeatability
External leak rate
Flow rate control range
Operating pressure range
Note 2
Proof pressure
Operating temperature
Flow rate setting and output signal
Supply power
Power consumption
Gas-wetted surface material
Note 4
Standard fitting
Mounting position
Weight
Options
Note 1—Accuracy ensures that the calibration gas equivalent flow is ±1% of full scale when 22 ± 3ºC in
temperature is obtained for the primary reference in the specified operating pressure range. If the service gas
and calibration gas are the same, the measured gas is ensured to be ±1% of full scale in the specified operat-
ing pressure range as to our primary reference.
Note 2—The proof pressure specification does not ensure operation or accuracy.
Note 3—Use of PTFE, Viton, or Chloroprene rubber may be required depending on the intended flow rate
range.
Note 4—3/8" VCR or 3/8" UJR fitting is required if 100 slm or more is derived from full-scale range N
equivalent.
6-10
FC-782
Normally open
Maximum 1 x 10
Note 3
1/4" VCR, 3/8" VCR, 1/4" UJR, 3/8" UJR
Current output (0 mA to 2.5 mA), error detection function
Specifications and Reference Information
35 slm to 150 slm
Within 3 s (typical), ±2%
Maximum ±2% of full scale
Maximum ±1% of full scale
Maximum at ±0.2% of full scale
-11 3
[Pa*m
2% to 100%
147 to 275 kPa(D); 21 to 40 psi(D)
981 kPa(G); 142 psi(G)
5ºC to 45ºC (41ºF to 113ºF)
0 VDC to 5.0 VDC
Minimum +15 VDC ±2% 25 mA
Minimum -15 VDC ±2% 220 mA
Maximum 3.7 W
SUS316, SUS316L, PTFE, KM-45
Any direction
2.8 kg (6.2 lb)
FC-782C
Normally closed
/sec(He)]
2
5700512-C