Add Tn464Gp/Tn2464Bp With Echo Cancellation - Avaya S8700 Manual

Table 4: Analog and digital trunk and line circuit packs 2 of 2
Apparatus
Code
TN746B
TN747B
TN753B
TN754C
TN760E
TN762B
TN763D
TN767E
TN769
TN793B
TN797
The following list provides information on installing analog and digital trunk and line circuit packs:
•

Add TN464GP/TN2464BP with Echo Cancellation

•
Add CO, FX, WATS, and PCOL
•
Add DID Trunks
•
Add Analog Tie Trunks
•
Add Digital DS1 Tie Trunks and OPS
•
Add TTC Japan 2-Mbit Trunk
•
Add CAMA/E911 Trunk
•
Add ISDN—PRI
•
Add TN1654 DS1 Converter (S8700 Multi-Connect only)
Add TN464GP/TN2464BP with Echo
Cancellation
The TN464GP and TN2464BP circuit packs with echo cancellation are intended for customers who are
likely to encounter echo over circuits connected to the Direct Distance Dialing (DDD) network. These
circuit packs are intended for channels supporting voice; therefore, they support the following trunks:
CAS, CO, DID, DIOD, DMI, FX, Tie, WATS. They do not support any data trunk groups.
The TN464GP and TN2464BP circuit packs are backwards compatible, although the echo cancellation
feature can only be used with Release 1.1 or later of Communication Manager and after the feature is
enabled.
Adding New Hardware--S8700
November 2003
Name
Analog Line, 16 ports
Central Office Trunk, 8 ports
Direct Inward Dialing (DID) Trunk, 8 ports
DCP Digital Line, 4-wire, 8 ports
Tie Trunk, 4-wire, 4 ports
Hybrid Line, 8 ports
Auxiliary Trunk, 4 ports
DS1 Interface Trunk—T1, 24 Channel
Analog Line, 8 ports
Analog Line with Caller ID, 24 ports
Analog CO Trunk or Line Combo—US, Canada, 8 ports
on page 36
on page 37
on page 38
on page 40
on page 41
on page 47
NOTE:
The P suffix designation means the circuit pack is programmable; new firmware can be
downloaded to the circuit pack.
Install and Administer Trunks and Lines
on page 33
on page 40
on page 49
33