GE M
S
EDICAL
YSTEMS
D
2392751-100, R
IRECTION
Section 8-8
Peripherals
8-8-1
B/W Video Printer Replacement Procedure
NOTE:
This section describes the installation and removal procedure for the Sony UP-895MDW B/W Video
Printer.
8-8-1-1
Tools
Use the appropriate flat and Phillips-type screw drivers.
8-8-1-2
Manpower
One person - 30 mins.
8-8-1-3
Preparations
1) Shut down the Vivid™ 4 ultrasound unit, as described in
2.) Remove the Connectors Panel cover as shown in the
on page 8 - 8.
3.) Unpack the B/W Video Printer.
4.) Check that the B/W Video Printer AC voltage corresponds to that of your local voltage.
5.) Verify that all the DIP Switches on the rear panel of the B/W Video Printer are in the Down position
as shown in
8-114
3
EVISION
Figure 8-100 SONY B/W Video Printer
Figure 8-101
on page 8-115.
Section 8-8 - Peripherals
V
™ 4 S
IVID
Chapter 3 -
Installation.
Connector Panels Cover Removal Procedure
M
ERVICE
ANUAL