GE Vivid 4 BT03 RFI Service Manual page 483

GE M S
EDICAL YSTEMS
D 2392751-100, R
IRECTION
Note: For clarification,
gas spring cable, and swivel release cable fitted in position, as seen from underneath .
Cable securing nut
Handle
7.) Using a combination wrench, release the swivel release cable from the cable retaining bracket by
loosening the securing nut, as shown in
Figure 8-87 Releasing the Gas Spring Cable from the Cable Retaining Bracket
8.) Release the swivel release cable from the up/down/swivel handle by carefully sliding the cable end
stopper out through the grooved slot on the handle assembly (refer to the detail shown in
Figure 8-88
9.) Repeat
10.)Repeat
shown in
8-100
3
EVISION
Figure 8-86 below shows a close-up view of the up/down/swivel handle,
Swivel release cable
Figure 8-86 Handle and Gas Spring Cables - Close-up View
on page 8-101).
step 7 to release the gas spring cable from the cable retaining bracket.
step 8 to release the gas spring cable from the up/down/swivel handle (refer to the detail
Figure 8-88 on page 8-101).
Section 8-6 - Lower Section Components Replacement
Figure 8-87 below.
V ™ 4 S M
IVID ERVICE
Cable retaining bracket
Gas spring cable
Swivel release cable
ANUAL