Mode (B Mode) Checks - GE Vivid 7 Service Manual

GE H
EALTHCARE
D FC091194, R
IRECTION EVISION
4-3-6 2D Mode (B mode) Checks
4-3-6-1 Introduction
The 2D Mode is the system's default mode.
4-3-6-2 Preparations
Use a phantom when doing these tests.
1.) Connect one of the probes, to the scanner's left-most active probe connector.
-
-
2.) Turn ON the scanner.
-
The 2D Mode window is displayed (default mode).
3.) If needed, adjust the Display's Brightness and Contrast setting.
4 - 32
11
Figure 4-27 2D Mode Screen Example
See "Probe Connection" on page 3-21
See section Section 9-26 "Probes" on page 9-80
See 4-2-2 "Power ON/ Boot UP" on page 4-3
Section 4-3 - Functional Checks
Status Window
Control Menu
for info about connecting the probes.
for available probes.
for info about booting the scanner.
V 7 S M
IVID ERVICE ANUAL