Figure 7-38 Flyq Database Update Error Message; Table 7-4 Wi-Fi Database Loading Errors - BENDIXKing XVUE TOUCH Installation Manual

The following additional Wi-Fi error messages may appear during the database loading.
Error Message
SERIAL NUMBER
CHECK FAILED
Unable to Contact KSD,
check Wi-Fi
Connection
Error 1007:
REGISTRATION
ALREADY USED
7.5.1.3. 2.2 FlyQ
Any database loading error messages appear on the KSD 100EXP, Figure 7-38.
IF ANY FILE(S) FAILED TO DOWNLOAD, THERE IS MOST LIKELY AN ISSUE WITH THE FLYQ
APP. TO CHECK THE STATUS OF THE FILES DOWNLOADED FOR A PARTICULAR STATE,
DOUBLE -TAP ON THE STATE. CONTACT SEATTLE AVIONICS FOR FURTHER ASSISTANCE.
89000109-002
Rev 2
© Honeywell International Inc. Do not copy without express permission of Honeywell.
For Use in Non-Certified Aircraft

Table 7-4 Wi-Fi Database Loading Errors

Description
The database .ZIP file is not set up
with the correct KSD 100EXP serial
number and there is mismatch
between what is set in the database
and the serial number of the unit on
the airplane.
This occurs if the Wi-Fi connection
between the KSD 100EXP and the
Wi-Fi device is disconnected for any
reason.
The one-time registration download
for the database is already utilized.

Figure 7-38 FlyQ Database Update Error Message

NOTE
Corrective Action
Verify KSD 100EXP serial number (unit
on airplane), download a new database
.ZIP file with the correct KSD 100EXP
serial number and reload.
Restart the KSD 100EXP and try loading
again.
Download the paid subscription.
xVue Touch Installation Manual
Page 7-29