Hdmi And Tps Output Port Properties - Lightware MMX8x4-HT Series User Manual


  
5. Software Control – Lightware Device Controller
5.5.3. HDMI and TPS Output Port Properties
INFO: MMX8x8-HDMI-4K-A model has no TPS output port.
TPS Output Port Properties Window
MMX8x4-HT series – User's Manual
Available Settings
▪ Port name
Mute/unmute the port;
▪
▪ Lock/unlock the port;
▪ Autoselect settings (Enabled / Disabled, Mode and Priorities) See
more details about this feature in The Autoselect Feature
Pay attention for the following settings for the proper operation
of Autoselect function:
– Set the Autoselect settings to Enabled;
– Be sure that no input is set to the same priority number;
– Be sure that all priority values are filled in (no empty space);
– Be sure that all inputs are enabled with the green checkbox
on the right side;
– Always click on the Set priorities button after the changes to
launch the new settings.
▪ Signal type (Auto / DVI / HDMI);
▪ HDCP mode (Auto / Always): The transmitter forces the source
sent the signal without encryption if the content allows when
Auto mode is selected.
▪ PWR5V mode (Auto / Always on / Always off): The setting lets
the source and the sink devices be connected – independently
from the transmitted signal;
▪ Audio mode (only in O2 and O4 ports of MMX8x8-HDMI-4K-A
model);
TPS mode* (Auto / HDBaseT / Longreach / LPPF1 / LPPF2 ). See
▪
more details about this setting in TPS Working Modes
▪ PoE setting* (enable / disable): The matrix is able to supply (send
remote power) devices through the TPS input and output ports
which are compatible with the PoE standard.
▪ Cable Diagnostics (in TPS port)*; For more details see
Diagnostics section.
*TPS related settings can be found only in TPS output properties
window.
Analog audio settings
The displayed configurable settings depends on the chosen audio
mode. For more details see
No sync screen
section.
Configuration settings of the test pattern. See more details in the
Pattern Generator - No Sync Screen
Status and Signal Info
It gives a feedback about the current parameters the of the video
signal:
▪ Monitor Present / Signal present / Signal type / HDCP / Hotplug
detect
Resolution / Scan / Color depth / Color space
▪
Display
This section gives a feedback about the basic information of the
connected sink device.
▪ Display name / Preferred resolution / HDMI capable / HDCP
capable /HDCP repeater / Deep Color Support / Deep Color YUV
support
Frame Detector
See more details about the Frame Detector in the
section.
CEC
section.
See more details about the CEC feature in
Other
Reloading Factory Default Settings
Cable
43
Analog Audio Input Settings section.
Test
section.
Frame Detector
CEC section.
for the selected port.