Show Sntp Status - 3Com 3CRUS2475 Command Reference Manual

show sntp status

Authentication is required for synchronization.
Trusted Keys: 8, 9
Unicast Clients Polling: Enabled
Server
-----------
176.1.1.8
176.1.8.179
Broadcast Clients: Enabled
Anycast Clients: Enabled
Broadcast Interfaces: g1, g3
The show sntp status Privileged EXEC mode command shows the status
of the Simple Network Time Protocol (SNTP).
Syntax
show sntp status
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Polling
-------
Enabled
Disabled
show sntp status 163
Encryption Key
--------------
9
Disabled