Power Over Ethernet Commands; Power Inline - 3Com 3CRUS2475 Command Reference Manual

14

power inline

P
OWER OVER
COMMANDS
The power inline Interface Configuration mode command configures
the administrative mode of the inline power on an interface.
Syntax
power inline {auto | never}
Parameters
auto — Turns on the device discovery protocol and applies power to
■
the device.
never — Turns off the device discovery protocol and stops supplying
■
power to the device.
Default Configuration
Auto
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example turns on the device discovery protocol on port 4.
Console(config)# interface ethernet 4
Console(config-if)# power inline auto
E
THERNET