Show Lacp Ethernet - 3Com 3CRUS2475 Command Reference Manual

show lacp ethernet

Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example assigns a long administrative LACP timeout to
Ethernet port g6.
Console(config)# interface ethernet g6
Console(config-if)# lacp timeout long
The show lacp ethernet Privileged EXEC mode command displays LACP
information for Ethernet ports.
Syntax
show lacp ethernet interface [parameters | statistics |
protocol-state]
Parameters
interface — Valid Ethernet port.Elana
■
parameters — Link aggregation parameter information.
■
statistics — Link aggregation statistics information.
■
protocol-state — Link aggregation protocol-state information.
■
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example display LACP information for Ethernet port 1.
show lacp ethernet 195