Tacacs-Server Key - 3Com 3CRUS2475 Command Reference Manual
Unified gigabit wireless poe switch 24
Hide thumbs
Also See for 3CRUS2475:
- Quick start manual (40 pages) ,
- Declaration of conformity (1 page) ,
- User manual (333 pages)
Table of Contents
Advertisement
396
C
27: TACACS+ C
HAPTER
tacacs-server key
OMMANDS
source — Specifies the source IP address to use for the
■
communication. 0.0.0.0 indicates a request to use the IP address of
the outgoing IP interface.
priority — Determines the order in which the TACACS+ servers are
■
used, where 0 is the highest priority. (Range: 0-65535)
Default Configuration
No TACACS+ host is specified.
If no port number is specified, default port number 49 is used.
If no host-specific timeout, key-string or source value is specified, the
global value is used.
If no TACACS+ server priority is specified, default priority 0 is used.
Command Mode
Global Configuration mode
User Guidelines
Multiple tacacs-server host commands can be used to specify multiple
hosts.
Example
The following example specifies a TACACS+ host.
Console(config)# tacacs-server host 172.16.1.1
The tacacs-server key Global Configuration mode command sets the
authentication encryption key used for all TACACS+ communications
between the device and the TACACS+ daemon. To disable the key, use
the no form of this command.
Syntax
tacacs-server key key-string
no tacacs-server key
Parameters
key-string — Specifies the authentication and encryption key for all
■
TACACS+ communications between the device and the TACACS+
Hide quick links:
Advertisement
Table of Contents
