Dot1X Guest-Vlan Enable - 3Com 3CRUS2475 Command Reference Manual

dot1x guest-vlan
enable
Example
The following example defines VLAN 2 as a guest VLAN.
Console#
Console# configure
Console(config)# vlan database
Console(config-vlan)# vlan 2
Console(config-vlan)# exit
Console(config)# interface vlan 2
Console(config-if)# dot1x guest-vlan
The dot1x vlans guest-vlan enable Interface Configuration mode
command enables unauthorized users on the interface access to the
Guest VLAN. To disable access, use the no form of this command
Syntax

dot1x guest-vlan enable

no dot1x guest-vlan enable
Default Configuration
Disabled.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
A device can have only one global guest VLAN. The guest VLAN is defined
using the dot1x guest-vlan Interface Configuration mode command.
Example
The following example enables unauthorized users on Ethernet port 1 to
access the guest VLAN.
Console# configure
Console(config)# interface ethernet g1
Console(config-if)# dot1x guest-vlan enable
dot1x guest-vlan enable 489