Show Authentication Methods - 3Com 3CRUS2475 Command Reference Manual

show
authentication
methods
Syntax
ip https authentication method1 [method2...]
no ip https authentication
Parameters
method1 [method2...] — Specify at least one method from the
■
following list:
Keyword
local
none
radius
tacacs
Default Configuration
The local user database is checked. This has the same effect as the
command ip https authentication local.
Command Mode
Global Configuration mode
User Guidelines
The additional methods of authentication are used only if the previous
method returns an error, not if it fails. To ensure that the authentication
succeeds even if all methods return an error, specify none as the final
method in the command line.
Example
The following example configures HTTPS authentication.
Console(config)# ip https authentication radius tacacs local
none
The show authentication methods Privileged EXEC mode command
displays information about the authentication methods.
Syntax

show authentication methods

Source or Destination
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for authentication.
show authentication methods 35