Show Wlan Rogue-Aps List - 3Com 3CRUS2475 Command Reference Manual

show wlan
rogue-aps list
name — Specify the AP name. (Range: 1-32 characters)
■
mac-address — Specify the AP MAC address.
■
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about rogue APs detection
configuration.
Console# show wlan rogue-aps configuration
Rogue APs detection is enabled.
AP name Radio
----------- --------
AP1 a
AP1 g
AP2 a
AP2 g
The show wlan rogue-aps list Privileged EXEC mode command displays
information about potential rogue APs.
Syntax
show wlan rogue-aps list [mac mac-address]

show wlan rogue-aps list

Scanning Interval
-------- -------------
Enabled Long
Enabled Long
Enabled Long
Enabled Long
327