Show Interfaces Port-Channel - 3Com 3CRUS2475 Command Reference Manual

show interfaces
port-channel
auto — Allows the port to join a channel as a result of an LACP
■
operation.
Default Configuration
The port is not assigned to a port-channel.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example forces port 1 to join port-channel 1 without an
LACP operation.
Console(config)# interface ethernet g1
Console(config-if)# channel-group 1 mode on
The show interfaces port-channel Privileged EXEC mode command
displays port-channel information.
Syntax
show interfaces port-channel [port-channel-number]
Parameters
port-channel-number — Valid port-channel number.
■
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example

show interfaces port-channel

115