Clock Summer-Time - 3Com 3CRUS2475 Command Reference Manual

clock summer-time

Syntax
clock timezone hours-offset [minutes minutes-offset] [zone acronym]
no clock timezone
Parameters
hours-offset — Hours difference from UTC. (Range: –12 hours to +13
■
hours)
minutes-offset — Minutes difference from UTC. (Range: 0-59)
■
acronym — The acronym of the time zone. (Range: Up to 4
■
characters)
Default Configuration
Clock set to UTC.
Command Mode
Global Configuration mode
User Guidelines
The system internally keeps time in UTC, so this command is used only for
display purposes and when the time is manually set.
Example
The following example sets the timezone to 6 hours difference from UTC.
#
Console(config)
The clock summer-time Global Configuration mode command
configures the system to automatically switch to summer time (daylight
saving time). To configure the software not to automatically switch to
summer time, use the no form of this command.
Syntax
clock summer-time recurring {usa | eu | {week day month hh:mm
week day month hh:mm}} [offset offset] [zone acronym]
clock summer-time date date month year hh:mm date month year
hh:mm [offset offset] [zone acronym]
clock timezone -6 zone CST
clock summer-time 151