342
C
23: W
HAPTER
update-gkey-on-lea
ve (Security-Suite
ESS)
ESS C
IRELESS
OMMANDS
reauth-time seconds — Re-authentication timeout period. (Range:
■
1-4294967295)
idle-time seconds — DLE timeout period. (Range: 1-9676800)
■
never — There is an unlimited rekeying timeout period.
■
Default Configuration
rekey-time-unicast — Never
■
rekey-time-multicast — Never
■
reauth-time — 14400
■
idle-time — Never
■
Command Mode
Security-Suite ESS Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the key exchange timers for a
security-suite as an unlimited rekeying timeout period.
Console (Conf\ig-wlan-ess)# security suite configure wpa
Console (Config-ess-security)# timer rekey-time-unicast never
The update-gkey-on-leave Security-Suite ESS Configuration mode
command defines that a group key should be updated after a station
leaves the AP. To disable updates, use the no form of this command.
Syntax
update-gkey-on-leave
no update-gkey-on-leave
Parameters
This command has no keywords or arguments.
Default Configuration