Dot1X Timeout Server-Timeout - 3Com 3CRUS2475 Command Reference Manual

dot1x timeout
server-timeout
Parameters
seconds — Time in seconds that the device waits for a response to an
■
EAP-request frame from the client before resending the request.
(Range: 1-65535 seconds)
Default Configuration
Default timeout period is 30 seconds.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
The default value of this command should be changed only to adjust for
unusual circumstances, such as unreliable links or specific behavioral
problems with certain clients. and authentication servers
Example
The following example sets the timeout period before retransmitting an
EAP-request frame to the client to 3600 seconds.
Console(config)# interface ethernet g16
Console(config-if)# dot1x timeout supp-timeout 3600
The dot1x timeout server-timeout Interface Configuration mode
command sets the time that the device waits for a response from the
authentication server. To restore the default configuration, use the no
form of this command.
Syntax
dot1x timeout server-timeout seconds
no dot1x timeout server-timeout
Parameters
seconds — Time in seconds that the device waits for a response from
■
the authentication server.
(Range: 1-65535 seconds)
Default Configuration

dot1x timeout server-timeout

477