Show Dot1X Users - 3Com 3CRUS2475 Command Reference Manual

show dot1x users

Field
Quiet period
Tx period
Max req
Supplicant timeout
Server timeout
Session Time
MAC address
Authentication Method
Termination Cause
State
Authentication success
Authentication fails
The show dot1x users Privileged EXEC mode command displays active
802.1x authenticated users for the device.
Syntax
show dot1x users
Description
The number of seconds that the device
remains in the quiet state following a
failed authentication exchange (for
example, the client provided an invalid
password).
The number of seconds that the device
waits for a response to an Extensible
Authentication Protocol
(EAP)-request/identity frame from the
client before resending the request.
The maximum number of times that
the device sends an Extensible
Authentication Protocol (EAP)-request
frame (assuming that no response is
received) to the client before restarting
the authentication process.
Time in seconds the switch waits for a
response to an EAP-request frame from
the client before resending the request.
Time in seconds the switch waits for a
response from the authentication
server before resending the request.
The amount of time the user is logged
in.
The supplicant MAC address.
The authentication method used to
establish the session.
The reason for the session termination.
The current value of the Authenticator
PAE state machine and of the Backend
state machine.
The number of times the state machine
received a Success message from the
Authentication Server.
The number of times the state machine
received a Failure message from the
Authentication Server.
481