Tacacs-Server Host - 3Com 3CRUS2475 Command Reference Manual

27

tacacs-server host

TACACS+ C
The tacacs-server host Global Configuration mode command specifies a
TACACS+ host. To delete the specified name or address, use the no form
of this command.
Syntax
tacacs-server host {ip-address | hostname} [single-connection] [port
port-number] [timeout timeout] [key key-string] [source source]
[priority priority]
no tacacs-server host {ip-address | hostname}
Parameters
ip-address — IP address of the TACACS+ server.
■
hostname — Host name of the TACACS+ server. (Range: 1-158
■
characters)
single-connection — Indicates a single-connection. Rather than have
■
the device open and close a TCP connection to the daemon each time
it must communicate, the single-connection option maintains a single
open connection between the device and the daemon.
port-number — Specifies a server port number. The host is not used
■
for authentication if the port number is set to 0. The host is not used
for authentication if the port number is set to 0. (Range: 0-65535)
timeout — Specifies the timeout value in seconds. (Range: 1-30)
■
key-string — Specifies the authentication and encryption key for all
■
TACACS+ communications between the device and the TACACS+
server. This key must match the encryption used on the TACACS+
daemon. To specify an empty string, enter "". (Range: 0-128
characters)
OMMANDS