Show Bridge Address-Table Static - 3Com 3CRUS2475 Command Reference Manual

show bridge
address-table static
User Guidelines
Internal usage VLANs (VLANs that are automatically allocated on ports
with a defined Layer 3 interface) are presented in the VLAN column by a
port number and not by a VLAN ID.
"Special" MAC addresses that were not statically defined or dynamically
learned are displayed in the MAC address table. This includes, for
example, MAC addresses defined in ACLS.
Example
In this example, all classes of entries in the bridge-forwarding database
are displayed.
Console# show bridge address-table
Aging time is 300 sec
interface
---------
1
1
200
The show bridge address-table static Privileged EXEC mode command
displays statically created entries in the bridge-forwarding database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface |
port-channel port-channel-number]

show bridge address-table static

mac address Port
-------------- ----
00:60:70:4C:73 g8
:FF
00:60:70:8C:73 g8
:FF
00:10:0D:48:37 g9
:FF
67
Type
-------
dynamic
dynamic
static