Show Management Access-List - 3Com 3CRUS2475 Command Reference Manual

show management
access-list
Parameters
console-only — Indicates that the device can be managed only from
■
the console.
name — Specifies the name of the access list to be used. (Range: 1-32
■
characters)
Default Configuration
If no access list is specified, an empty access list is used.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures an access list called 'mlist' as the
management access list.
Console(config)# management access-class mlist
The show management access-list Privileged EXEC mode command
displays management access lists.
Syntax
show management access-list [name]
Parameters
name — Specifies the name of a management access list. (Range:
■
1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines

show management access-list

321