Show Wlan Aps - 3Com 3CRUS2475 Command Reference Manual

360 C 24: W
HAPTER

show wlan aps

AP G C
IRELESS ENERAL OMMANDS
Default Configuration
This command has no default configuration.
Command Mode
Wireless AP template configuration mode
User Guidelines
Copying the template to an AP overrides the entire AP configuration with
the template configuration.
Example
The following example copies a wirless AP configuration parameters from
a template AP "enterprise" to an AP called "Switch".
Console (Config)# wlan template ap configure type1
Console (Config-wlan-template-ap)# set wlan copy ap enterprise
to ap Switch
The show wlan aps Privileged EXEC mode command displays
information on active APs.
Syntax
show wlan aps [name | mac-address]
show wlan aps radio [a | g]
show wlan aps ess [ssid]
show wlan aps vlans [ssid]
show wlan aps version [name | mac-address]
Parameters
name — The AP name. (Range: 1-32 characters)
■
mac-address — The AP MAC address.
■
a — Radio type is 802.1a.
■
g — Radio type is 802.1g.
■
ssid — The ESS SSID. (Range: 1-32 characters)
■
Default Configuration