Show Policy-Map - 3Com 3CRUS2475 Command Reference Manual

show policy-map

Use the service-policy (Ethernet, Port-channel) Interface Configuration
mode command to attach a policy map to an interface. Use an existing
class map to attach classification criteria to the specified policy map and
use the access-group parameter to modify the classification criteria of
the class map.
If this command is used to create a new class map, the name of an IP or
MAC ACL must also be specified.
Example The following example defines a traffic classification called
'class1' with an access-group called 'enterprise'. The class is in a policy
map called policy1.
Console(config)# policy-map policy1
Console (config-pmap)# class class1 access-group enterprise
The show policy-map Privileged EXEC mode command displays the
policy maps.
Syntax
show policy-map [policy-map-name [class-name]]
Parameters
policy-map-name — Specifies the name of the policy map to be
■
displayed.
class-name — Specifies the name of the class whose QoS policies are
■
to be displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
show policy-map 123