Ip Domain-Name - 3Com 3CRUS2475 Command Reference Manual

314 C 20: IP A
HAPTER

ip domain-name

C
DDRESS OMMANDS
Interface
---------
g1
g2
The ip domain-name Global Configuration mode command defines a
default domain name used by the software to complete unqualified host
names (names without a dotted-decimal domain name). To remove the
default domain name, use the no form of this command.
Syntax
ip domain-name name
no ip domain-name
Parameters
name — Specifies the default domain name used to complete
■
unqualified host names. Do not include the initial period that
separates an unqualified name from the domain name. (Range: 1-158
characters)
Default Configuration
A default domain name is not defined.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines default domain name www.3Com.com.
Console(config)# ip domain-name www.3Com.com
IP address HW address
---------- --------------
---
10.7.1.102 00:10:B5:04:DB
:4B
10.7.1.135 00:50:22:00:2A
:A4
Status
-------
Dynamic
Static