Lacp Timeout - 3Com 3CRUS2475 Command Reference Manual

194 C 13: LACP C
HAPTER

lacp timeout

OMMANDS
Syntax
lacp port-priority value
no lacp port-priority
Parameters
value — Specifies port priority. (Range: 1-65535)
■
Default Configuration
The default port priority is 1.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines the priority of Ethernet port g6 as 247.
Console(config)# interface ethernet g6
Console(config-if)# lacp port-priority 247
The lacp timeout Interface Configuration (Ethernet) mode command
assigns an administrative LACP timeout. To return to the default
configuration, use the no form of this command.
Syntax
lacp timeout {long | short}
no lacp timeout
Parameters
long — Specifies the long timeout value.
■
short — Specifies the short timeout value.
■
Default Configuration
The default port timeout value is long.