Spanning -Tree Commands; Spanning-Tree; Spanning-Tree Mode - 3Com 3CRUS2475 Command Reference Manual

15

spanning-tree

spanning-tree
mode
S
PANNING
The spanning-tree Global Configuration mode command enables
spanning-tree functionality. To disable the spanning-tree functionality, use
the no form of this command.
Syntax
spanning-tree
no spanning-tree
Default Configuration
Spanning-tree is enabled.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables spanning-tree functionality.
Console(config)# spanning-tree
The spanning-tree mode Global Configuration mode command
configures the spanning-tree protocol. To restore the default
configuration, use the no form of this command.
Syntax
spanning-tree mode {stp | rstp| mstp}
-T C
REE OMMANDS